V-belt Optibelt 17 X 3200 CP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 X 3200 CP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 X 3200 CP and any equivalents.
The Optibelt 17 X 3200 CP is a classical V-belt from the Conveyor Power series. It has a B profile, a 17 mm top width, an 11 mm height, a 40-degree angle, and a 3200 mm length. Use these dimensions to match the belt you are replacing.
When matching a belt, start with the profile and length. The B profile is a classical V-belt cross-section, and the 40-degree angle is the included angle of the belt sides. The 17 mm top width and 11 mm height confirm the cross-section. The 3200 mm length is the datum length for this belt. Compare these values to the marking on the belt you are replacing; if the profile and length match, the 17 X 3200 CP is the correct replacement.
If the old belt is worn or the marking is unreadable, measure the top width and height with a caliper and measure the outside length with a tape. A B-profile belt will measure approximately 17 mm across the top and 11 mm tall. The length should be close to 3200 mm. If the measured values match, the 17 X 3200 CP is the belt to specify.
To request a quote, send the part number 17 X 3200 CP, the quantity, and the drive or equipment it fits. If you are unsure of the profile or length, send a photo of the belt marking and the measured dimensions. We carry the Optibelt 17 X 3200 CP and can help confirm it is the right belt for your application.
Dimensions
- Section
- B
- Length
- 3200mm
Frequently asked questions
- What are the dimensions of the Optibelt 17 X 3200 CP?
- It has a B profile, a 17 mm top width, an 11 mm height, a 40-degree angle, and a 3200 mm length.
- How do I match this belt to the one I am replacing?
- Check the profile and length on the old belt. The 17 X 3200 CP is a B-profile belt with a 3200 mm length. If the old belt has the same profile and length, it is the correct replacement.
- What should I send to request a quote?
- Send the part number 17 X 3200 CP, the quantity, and the equipment it fits. If the marking is unreadable, send the measured top width, height, and length.