V-belt Optibelt 17 x 2650 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 2650 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 2650 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a B profile. The marking 17 x 2650 Li gives the top width and the length, so you can match it directly to your drive. Use these two values to confirm the belt your equipment requires.
The profile is B, with a top width of 17 mm and a height of 11 mm. The included angle is 40 degrees. The length is 2650 mm, shown as Li on the belt. These dimensions are the primary selection criteria when replacing a classical V-belt.
To request a quote, send the part number 17 x 2650 Li or the full marking from the back of the belt. If you are unsure of the profile or length, include photos of the old belt and the drive sheaves. The team can help confirm the right belt or suggest an equivalent.
Inspect the sheaves for wear and alignment before installing a new belt. On drives with multiple belts, replace all belts at the same time to keep load sharing even. Keep the old belt for comparison and note the marking for future orders.
Dimensions
- Section
- B
- Length
- 2650mm
Frequently asked questions
- What do the numbers 17 x 2650 Li mean on this Optibelt belt?
- The 17 is the top width in millimeters. The 2650 Li is the length in millimeters. The profile is B, with a height of 11 mm and a 40-degree angle.
- How do I request a quote for this belt?
- Send the part number 17 x 2650 Li by WhatsApp or email. If you have the old belt, include a photo of the marking on the back. The team replies promptly and can help confirm the right belt or suggest an equivalent.
- Should I replace all belts on a multi-belt drive at once?
- Yes. On drives with multiple belts, replace them as a set so they share the load evenly. Also check sheave wear and alignment before installing the new belts.