V-belt Optibelt 17 x 2565 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 2565 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 2565 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a B profile, a 17 mm top width and a 2565 mm length. Before you fit it, check the drive and sheaves so the new belt seats and runs correctly.
Inspect the sheave grooves for wear, rust, burrs or embedded debris. Worn or damaged grooves can prevent a new belt from seating properly, which leads to slipping, heat and short belt life. Confirm the sheaves are aligned and the grooves match the belt profile. Check the driven and drive equipment for bearing play, loose mounts or obstructions, and correct any issue before installation.
This belt has a 17 mm top width, 11 mm height and a 40 degree angle. The profile is B and the length is 2565 mm. When you replace a belt, compare the marking on the back of the old belt with these values. If the existing belt is worn or the marking is unreadable, measure the top width, height and outside length to confirm the profile and length before ordering.
To request a quote, send the part number 17 x 2565 Li, the brand Optibelt and the quantity you need by WhatsApp or email. If you are unsure about the profile or length, include the belt marking, the sheave dimensions and the equipment details so the team can help confirm the right belt.
Dimensions
- Section
- B
- Length
- 2565mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Check the sheave grooves for wear, rust, burrs or debris, confirm sheave alignment and groove profile, and inspect bearings and mounts for play or looseness. Correct any problems before fitting the new belt.
- How do I confirm this is the right belt for my drive?
- Compare the marking on the back of the old belt with the profile B, 17 mm top width, 11 mm height and 2565 mm length. If the marking is unreadable, measure the old belt and the sheave grooves.
- What information do you need for a quote?
- Send the part number 17 x 2565 Li, the brand Optibelt and the quantity. If you are unsure of the size, include the old belt marking and details of the drive and sheaves.