V-belt Optibelt 17 x 2450 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 2450 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 2450 Li and any equivalents.
This page covers the Optibelt 17 x 2450 Li belt from the VB S=C Plus series, a classical V-belt we carry for industrial drives. It has a B profile, a top width of 17 mm, a height of 11 mm and a 40-degree angle. The length is 2450 mm.
When you request a quote, send the full marking from the back of the belt: Optibelt 17 x 2450 Li, VB S=C Plus. That single line lets us match the profile, the length and the construction without back-and-forth. If the old belt is worn or the marking is unreadable, measure the top width and the outside length and send those values along with a photo of the belt and the drive.
The B profile is a classical V-belt cross-section, and the 2450 mm length is the dimension that positions the belt in the drive. The 17 mm top width and 11 mm height are the section dimensions, and the 40-degree angle is the flank angle. All of these are fixed by the belt's design, so any replacement must match them.
This belt is used on industrial drives where a classical V-belt is specified. If you are replacing more than one belt on a multi-belt drive, list every belt position in the quote request so we can confirm the correct part for each. For a single belt, the part number and the drive details are enough to get started.
Dimensions
- Section
- B
- Length
- 2450mm
Frequently asked questions
- What do I need to send to get a quote for the Optibelt 17 x 2450 Li?
- Send the part number exactly as marked: Optibelt 17 x 2450 Li, VB S=C Plus. If you have the old belt, include a photo of the back marking and the drive. For drives with multiple belts, list the quantity and position of each belt.
- Can you confirm this belt matches my drive before I order?
- Yes. Send the belt marking and the drive details, such as the pulley diameters and the center distance. We will check the profile, top width, height, angle and length against the data for this belt.
- The marking on my old belt is worn. How can I identify it?
- Measure the top width and the outside length of the old belt. Send those measurements with a photo of the belt and the drive. We will compare them with the 17 mm top width and 2450 mm length of this Optibelt belt.