V-belt Optibelt 17 x 2400 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 2400 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 2400 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a B profile and a length of 2400 mm. The marking 17 x 2400 Li reflects a top width of 17 mm and a height of 11 mm. Use these dimensions to match the belt you are replacing.
To confirm the correct replacement, read the marking on the back of the old belt. The profile letter and length are the key fields: this belt is profile B with a 2400 mm length. The top width of 17 mm and height of 11 mm, along with the 40-degree angle, should correspond to the belt currently in service.
If the old marking is worn or unreadable, measure the top width and the outside length of the belt. Compare those measurements with the 17 mm top width and 2400 mm length listed here. When the profile and length align, this Optibelt VB S=C Plus belt is the direct match for the drive.
Send the part number 17 x 2400 Li or your measured dimensions by WhatsApp or email to request a quote. Our team can confirm the belt or suggest an equivalent if the original marking is unclear.
Dimensions
- Section
- B
- Length
- 2400mm
Frequently asked questions
- How do I verify this belt matches the one I am replacing?
- Check the marking on the back of the old belt for the profile letter and length. This belt is profile B, 2400 mm long, with a 17 mm top width and 11 mm height. If those match, it is the correct replacement.
- What if the old belt marking is no longer readable?
- Measure the top width and the outside length of the old belt. Compare those measurements to the 17 mm top width and 2400 mm length of this belt. If they align, this belt will fit the drive.
- What information should I send to request a quote?
- Send the part number 17 x 2400 Li, or your measured profile and length, by WhatsApp or email. Our team will reply promptly to confirm the belt or suggest an equivalent.