V-belt Optibelt 17 x 2337 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 2337 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 2337 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a B profile, a top width of 17 mm, a height of 11 mm and a 40-degree angle. It is used on industrial drives where a classical V-belt is specified, and the 2337 mm length is a datum length. If you are replacing a worn belt, confirm the profile and length against the old belt or the drive documentation before ordering.
The profile and length are the two dimensions that determine fit. This belt is profile B, which is a classical V-belt section, and its length is 2337 mm. The top width is 17 mm, the height is 11 mm and the included angle is 40 degrees. These values match the belt marking 17 x 2337 Li, so you can compare them directly with the belt you are replacing.
Classical V-belts are common on industrial machinery such as pumps, fans, compressors and other driven equipment where a single or multiple belt drive is used. To confirm this belt suits your drive, check the pulley groove profile and the required belt length. If the old belt is still readable, note the profile letter and the length marked on the back. A belt that is too long or too short will not tension correctly, and the wrong profile will not seat in the groove.
If you are unsure, send the part number 17 x 2337 Li, the profile and the length, or a photo of the old belt marking. The team can confirm the belt or suggest an equivalent. For drives using multiple belts, replace the full set at the same time so the belts share the load evenly.
Dimensions
- Section
- B
- Length
- 2337mm
Frequently asked questions
- How do I confirm this Optibelt VB S=C Plus belt fits my drive?
- Check the old belt for the profile letter and length. This belt is profile B with a 2337 mm length, a 17 mm top width, an 11 mm height and a 40-degree angle. Compare those values with your drive documentation or the belt marking.
- What does 17 x 2337 Li mean on this belt?
- The marking gives the top width and the length. The top width is 17 mm and the length is 2337 mm. The profile is B, which is a classical V-belt section.
- Can you help if I cannot read the old belt marking?
- Yes. Send the part number 17 x 2337 Li, the profile and the length, or a photo of the old belt. The team can confirm the right belt or suggest an equivalent.