V-belt Optibelt 17 x 2120 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 2120 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 2120 Li and any equivalents.
The Optibelt VB S=C Plus 17 x 2120 Li is a classical V-belt with a B profile. It measures 17 mm across the top, 11 mm in height, 2120 mm in length, and has a 40-degree angle. We carry this belt for maintenance and replacement work.
To match this belt to the one being replaced, compare the marking on the old belt with the code 17 x 2120 Li. Check that the profile is B, the top width is 17 mm, the height is 11 mm, and the length is 2120 mm. The 40-degree angle is part of the profile. If the old belt is worn or the marking is unreadable, measure the top width and the outside length, then send those dimensions with the part number.
The VB S=C Plus series is a classical V-belt construction. Profile B is a common cross-section, and the 2120 mm length places it in a specific drive position. Confirm that the replacement belt matches the original in profile, top width, height, and length. If the drive uses more than one belt, replace the full set so the belts share the load evenly.
When you request a quote, send the part number 17 x 2120 Li or the full marking from the back of the belt. If you have the old belt, include a photo of the marking and the drive arrangement. Our team can confirm the profile and length, and help you identify the correct replacement.
Dimensions
- Section
- B
- Length
- 2120mm
Frequently asked questions
- How do I match this belt to the one I am replacing?
- Compare the marking on the old belt to 17 x 2120 Li. Confirm the profile is B, the top width is 17 mm, the height is 11 mm, and the length is 2120 mm. The angle is 40 degrees. If the marking is unreadable, measure the top width and outside length.
- What should I send to request a quote?
- Send the part number 17 x 2120 Li or the full marking from the back of the belt. If you have the old belt, include a photo of the marking and the drive arrangement. Our team will confirm the profile and length.
- Should I replace all belts on a multi-belt drive at the same time?
- Yes. On a drive that uses more than one belt, replace the full set so the belts share the load evenly. Mixing new and worn belts can cause uneven tension and premature failure.