V-belt Optibelt 17 X 2000 CP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 X 2000 CP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 X 2000 CP and any equivalents.
When you need to replace a classical V-belt, the marking on the old belt is the most reliable reference. This page covers the Optibelt 17 X 2000 CP from the Conveyor Power series, a B-profile belt measuring 2000 mm. Read the back of your existing belt and compare it to the details below.
The Optibelt 17 X 2000 CP is a classical V-belt with a B profile. It has a top width of 17 mm, a height of 11 mm, and a 40-degree angle. The length is 2000 mm. These figures come directly from the belt data, so you can match them against the marking printed on your old belt.
To confirm a match, look for the part number on the back of the belt. The marking typically shows the profile and length, which in this case are B and 2000 mm. If the old belt is worn or the marking is unreadable, measure the top width and the outside length where possible. The 17 mm top width and 2000 mm length are the key dimensions for this belt.
We carry the Optibelt 17 X 2000 CP for maintenance, engineering, and purchasing teams. To request a quote, send the part number 17 X 2000 CP by WhatsApp or email. If you need help confirming the right belt or an equivalent, include the old belt's marking and any measurements you have. Our team replies promptly.
Dimensions
- Section
- B
- Length
- 2000mm
Frequently asked questions
- How do I verify that the Optibelt 17 X 2000 CP is the correct belt for my drive?
- Check the marking on the back of your old belt. The profile should be B and the length should be 2000 mm. You can also compare the top width of 17 mm and the height of 11 mm. If the marking is unclear, send us the details you can read and we will help confirm.
- What information should I send with my quote request for this belt?
- Send the part number 17 X 2000 CP, along with any marking from the old belt and the dimensions you can measure. If you are unsure about the profile or length, include that in your message. We will review it and reply promptly.
- Can you help if my old belt marking is different from 17 X 2000 CP?
- Yes. Send us the marking on your old belt and any measurements you have. We will compare it to the Optibelt 17 X 2000 CP, which has a B profile, 17 mm top width, 11 mm height, 40-degree angle, and 2000 mm length, and help you confirm the right belt.