V-belt Optibelt 17 x 1775 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 1775 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 1775 Li and any equivalents.
The Optibelt VB S=C Plus is a classical V-belt with a B profile, a top width of 17 mm, a height of 11 mm and a 40-degree angle. The code 17 x 1775 Li gives you the section and the length to match against the marking on your existing belt.
When you read the back of an old belt, the marking is your starting point. Here the code is 17 x 1775 Li: 17 mm top width, 1775 mm length, Li. Check the profile letter, B, and the dimensions against the data on this page before you request a quote. If the marking is worn or missing, measure the top width and the outside length of the old belt and send those figures.
This is a classical V-belt, not a narrow wedge belt, so it suits drives built for the B section. The 40-degree angle and the 11 mm height are part of the profile, and they must match the pulley groove. A belt that seats incorrectly can slip or wear quickly, so confirm the section before ordering.
To request a quote, send the part number 17 x 1775 Li or the full marking from the old belt by WhatsApp or email. If you are replacing more than one belt on the same drive, include the quantity and the position. The team can confirm the right belt or suggest an equivalent from the information you provide.
Dimensions
- Section
- B
- Length
- 1775mm
Frequently asked questions
- How do I read the marking on my old belt?
- Look for a code like 17 x 1775 Li on the back of the belt. The 17 is the top width in mm, 1775 is the length in mm, and Li identifies the length system. Match the profile letter, B, to the data on this page.
- What should I send to request a quote?
- Send the part number 17 x 1775 Li, or the full marking from the old belt, by WhatsApp or email. Include the quantity if you are replacing more than one belt. If the marking is unreadable, send the top width and length measurements.
- Is this a narrow wedge belt?
- No. The Optibelt VB S=C Plus is a classical V-belt with a B profile, a top width of 17 mm, a height of 11 mm and a 40-degree angle. It is not a narrow V-belt or wedge belt.