V-belt Optibelt 17 x 1725 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 1725 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 1725 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt in profile B, with a top width of 17 mm, a height of 11 mm, a 40-degree angle, and a length of 1725 mm. It is the belt to specify when the drive calls for a B-profile classical V-belt of this length. The most reliable way to order is to match it to the belt you are replacing.
Start with the marking on the back of the old belt. A B-profile classical V-belt with a 17 mm top width, an 11 mm height, and a 40-degree angle points to this Optibelt VB S=C Plus. Confirm the length: the belt is listed at 1725 mm. If the old belt is worn or the marking is unreadable, measure the outside length and compare it with the 1725 mm figure before you request a quote.
The part number 17 x 1725 Li identifies this belt in the Optibelt VB S=C Plus line. Send that part number, or a clear photo of the belt and its marking, and the team can confirm the right belt or suggest an equivalent. For drives using more than one belt, order the full set so all belts on the drive are the same profile and length.
We carry the Optibelt VB S=C Plus line for maintenance, engineering, and purchasing teams across the United States, Canada, Mexico, and South America. Quotes are handled by WhatsApp or email, and the team replies promptly.
Dimensions
- Section
- B
- Length
- 1725mm
Frequently asked questions
- How do I confirm this is the correct belt for my drive?
- Read the marking on the back of the belt being replaced. You are looking for a B-profile classical V-belt with a 17 mm top width, an 11 mm height, a 40-degree angle, and a 1725 mm length. If the marking matches, this Optibelt VB S=C Plus belt is the one to quote.
- What should I send to request a quote?
- Send the part number 17 x 1725 Li, or the full marking from the old belt, by WhatsApp or email. A photo of the belt and its marking also helps the team confirm the correct belt or suggest an equivalent.
- Should I replace all belts on a multi-belt drive at once?
- Yes. When a drive uses more than one belt, replace the full set so every belt has the same profile and length. Order the number of belts the drive requires.