V-belt Optibelt 17 X 1600 CP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 X 1600 CP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 X 1600 CP and any equivalents.
The Optibelt 17 X 1600 CP is a classical V-belt in the Conveyor Power series with a B profile and a 1600 mm length. Before you fit a replacement, inspect the drive and sheaves so the new belt runs true from the start.
Check sheave grooves for wear, burrs, and buildup. A worn groove lets the belt sit too deep, so it slips and wears quickly even when the belt itself is correct. Confirm the sheaves are aligned and the shafts turn freely. If a sheave is damaged, address it before fitting the Optibelt 17 X 1600 CP.
The belt measures 17 mm across the top, 11 mm high, and has a 40° angle. Its B profile and 1600 mm length identify it, so match those figures to the old belt and to the drive. If the marking on the old belt is unreadable, send the part number 17 X 1600 CP and photos of the drive and sheaves for a quote.
When you replace a belt on a multi-belt drive, fit a matched set so the load is shared evenly. A single new belt among worn ones can carry more than its share and fail early. The Optibelt 17 X 1600 CP is a classical V-belt from the Conveyor Power series.
Dimensions
- Section
- B
- Length
- 1600mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear, burrs, and buildup, confirm alignment, and make sure the shafts turn freely. Correct any sheave problems before you fit the Optibelt 17 X 1600 CP.
- How do I confirm this is the right belt?
- Match the B profile and 1600 mm length to the old belt and to the drive. The belt is 17 mm across the top, 11 mm high, and has a 40° angle.
- What do you need to quote the 17 X 1600 CP?
- Send the part number 17 X 1600 CP by WhatsApp or email. If the old belt marking is unreadable, include photos of the drive and sheaves so we can confirm the profile and length.