V-belt Optibelt 17 X 1320 CP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 X 1320 CP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 X 1320 CP and any equivalents.
The Optibelt 17 X 1320 CP is a classical V-belt from the Conveyor Power series. Its profile and length are the two values that decide whether it fits your drive: profile B with a 17 mm top width and 1320 mm length. This page gives you those dimensions so you can confirm the belt against your own drive before you request a quote.
Profile B is a classical V-belt section. This belt measures 17 mm across the top, 11 mm high, and its flanks are cut at 40 degrees. The length is 1320 mm. If your old belt carries a B section marking and measures close to that length, this is the size to compare against.
The marking on the back of a belt is the fastest way to identify it. Read the profile letter and the length number from your existing belt, then match them to the profile and length above. Where the marking has worn off, measure the top width and the outside length of the belt and send those figures to our team.
Send the part number 17 X 1320 CP, or your own belt marking and measurements, by WhatsApp or email. Our team replies promptly and can confirm the right belt for the drive or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 1320mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- They are the two fit values. The profile is B, which sets the cross-section: 17 mm top width, 11 mm height, 40 degree angle. The length is 1320 mm. Both must match your drive.
- How do I check this belt against the one on my drive?
- Read the profile letter and length number on the back of the old belt and compare them with B and 1320 mm. If the marking is gone, measure the top width and the outside length instead.
- What should I send to get a quote?
- Send the part number 17 X 1320 CP, or the marking and measurements from your existing belt, by WhatsApp or email. Our team replies promptly and can help confirm the right belt.