V-belt Optibelt 17 x 1060 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 1060 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 1060 Li and any equivalents.
The Optibelt VB S=C Plus is a classical V-belt in profile B, sized 17 x 1060 Li. Before you fit a replacement, inspect the drive and sheaves so the new belt runs true and wears evenly. MR Industrial Accessories supplies this belt to maintenance, engineering and purchasing teams across the US, Canada, Mexico and South America.
Check each sheave groove for wear, rust, burrs or embedded debris. Worn or misaligned sheaves can damage a new belt quickly, so correct any alignment or groove problems before installation. Confirm the drive is free of obstructions and that the belt path is clear.
The belt is marked 17 x 1060 Li, with a top width of 17 mm, a height of 11 mm and a 40-degree angle. Its profile is B and its length is 1060 mm. Use these figures to match the belt you are replacing and to verify it sits correctly in the sheave grooves.
When you request a quote, send the part number 17 x 1060 Li and the quantity you need. If you are unsure about the profile or length, include the marking from the back of the old belt and a photo of the drive. The team replies promptly by WhatsApp or email and can help confirm the right belt.
Dimensions
- Section
- B
- Length
- 1060mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheaves for wear, rust, burrs or debris, and check alignment. Correct any issues before installation so the new belt seats properly and wears evenly.
- How do I confirm this is the right belt for my drive?
- Compare the marking on your old belt with 17 x 1060 Li, and check the profile B and length 1060 mm against the drive. If you are unsure, send the old marking and a photo of the drive for confirmation.
- What information do you need for a quote?
- Send the part number 17 x 1060 Li and the quantity you need by WhatsApp or email. If you have the old belt marking or a photo of the drive, include that as well.