V-belt Optibelt 17 x 1000 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 1000 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 1000 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a B profile and a 1000 mm length. The 17 x 1000 Li marking identifies a 17 mm top width and an 11 mm height. Use the part number and dimensions below when requesting a quote.
To confirm the right belt, send the full marking from the back of the existing belt: 17 x 1000 Li. Include the profile B and the 1000 mm length so the team can match the size. The 40-degree angle and 11 mm height are also part of the specification.
If the old belt is worn or the marking is unreadable, measure the top width and the outside length where possible. The 17 mm top width and 1000 mm length are the key dimensions for this classical V-belt. Photographs of the drive and the belt can help confirm the profile.
The team replies by WhatsApp or email and can check the part number against the Optibelt VB S=C Plus line. Provide the quantity, the drive position and any other belts on the same drive so the replacement can be reviewed as a set.
Dimensions
- Section
- B
- Length
- 1000mm
Frequently asked questions
- What should I send to request a quote for this belt?
- Send the part number 17 x 1000 Li, the profile B, and the 1000 mm length. If you have the old belt, include the full marking from the back and a photo of the drive.
- Can you help if the marking on my old belt is worn off?
- Yes. Measure the top width and the length where possible. For this belt the top width is 17 mm and the length is 1000 mm. The height is 11 mm and the angle is 40 degrees.
- Do you need the quantity and drive details?
- Yes. Include the quantity and the drive position. If the drive uses more than one belt, mention the other belts so the set can be reviewed together.