Timing belt Optibelt 1600 S8M
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1600 S8M belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1600 S8M and any equivalents.
This Optibelt 1600 S8M timing belt is part of the Omega High Power series and uses an STD profile with a 1600 mm length. It is built for synchronous drives where tooth engagement, not friction, carries the load. Use it as the reference when you need to confirm fit on a specific drive.
Timing belts like this one are common on drives that must stay in step: camshafts, pumps, conveyors, and other equipment where slip is not acceptable. The STD profile and 1600 mm length are the two dimensions to check first. Compare them against the belt you are replacing or the drive drawing before you order.
The most reliable way to confirm fit is to read the marking on the back of the old belt. If it shows 1600 S8M, this Optibelt belt matches that size. Also check the pulley grooves and the width across the back of the belt, since a belt that is close in length but wrong in profile will not run correctly.
If the marking is worn off, measure the length and identify the profile from the pulley teeth. Send those details, or simply the part number 1600 S8M, and we will help confirm the right belt for your drive.
Dimensions
- Profile
- STD
- Length
- 1600mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the marking on the back of your current belt for 1600 S8M. If it matches, this Optibelt belt is the same size. Also confirm the profile and length against your drive documentation.
- What should I send for a quote?
- Send the part number 1600 S8M, or the marking from your old belt, along with the application details. We will reply with a quote and help confirm the correct belt.
- Where is this type of belt used?
- Timing belts are used on synchronous drives such as camshafts, pumps, and conveyors where the belt must stay in step with the pulleys. The STD profile and 1600 mm length define the fit.