Timing belt Optibelt 16 T5K6 / 9600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 T5K6 / 9600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 T5K6 / 9600 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 16 T5K6 / 9600 AFX. Its T5 profile and 9600 mm length are the two dimensions to check first when matching a drive. Use the markings on the belt and the drive data to confirm it fits.
The T5 profile is a synchronous belt profile, and the 5 mm pitch is the distance from one tooth center to the next. The 9600 mm length is the belt's datum length. On a long drive, those two figures decide whether the belt will mesh correctly with the pulleys and sit at the right center distance. If your drive was built around a T5 profile, this belt will run on the same pulleys; if the length is wrong, the take-up will not reach.
The most reliable way to order is to read the back of the old belt. Look for the full code, including 16 T5K6 / 9600 AFX, and send that with a photo of the drive. If the marking is worn, measure the length and count the teeth, then send both numbers. We carry Optibelt Alpha Flex and can help confirm the right belt or suggest an equivalent.
When you request a quote by WhatsApp or email, include the part number and the quantity. If you are replacing more than one belt on the same drive, list every belt so we can match them as a set. Our team replies promptly and will check the profile and length against your data.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 9600mm
Frequently asked questions
- What do the T5 profile and 9600 mm length mean for my drive?
- T5 is the profile and 5 mm is the pitch, so the belt meshes with T5 pulleys. The 9600 mm length is the datum length; confirm it against your drive's required length before ordering.
- How do I confirm this is the right belt?
- Read the code on the back of the old belt. If it matches 16 T5K6 / 9600 AFX, send that code and a photo of the drive. If the marking is gone, measure the length and count the teeth.
- Can you help if I am not sure about the length?
- Yes. Send the part number, the drive details and any measurements you have. We will check the T5 profile and 9600 mm length and help you confirm the right belt.