Timing belt Optibelt 16 T5K6 / 7400 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 T5K6 / 7400 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 T5K6 / 7400 AFX and any equivalents.
The Optibelt 16 T5K6 / 7400 AFX is an Alpha Flex timing belt built on a T5 profile with a 7400 mm length and a 5 mm pitch. It is the correct starting point when you are matching a belt to the one being replaced on a synchronous drive.
Start by reading the marking on the back of the belt you are removing. The T5 profile and the 7400 mm length are the two values that identify this belt in the drive, and the 5 mm pitch is the tooth spacing the pulleys are cut for. If the old belt is worn or the marking has rubbed off, measure the length along the belt and check the tooth form against the pulley grooves.
Once you have confirmed the profile and length, send us the part number 16 T5K6 / 7400 AFX by WhatsApp or email and our team will confirm the belt for your application. If your drive uses more than one belt, replace the set together so the load stays evenly shared across the pulleys.
Before the new belt goes on, inspect the pulleys for worn teeth, check the flanges and alignment, and set the tension to the drive manufacturer's specification. A belt that fails early usually points to a pulley or alignment problem rather than the belt itself.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 7400mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt being replaced. This belt is a T5 profile with a 7400 mm length and a 5 mm pitch. If those match, send the part number to our team and we will confirm it for your drive.
- Can you help if the old belt marking is unreadable?
- Yes. Send us a photo of the belt and the pulley, along with the drive details, and our team will help identify the correct profile and length.
- Should I replace more than one belt at a time?
- On drives that run multiple belts, replace them as a set. Mixed wear across an old and a new belt can cause uneven loading and shorten the life of the new one.