Timing belt Optibelt 16 T5K6 / 2200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 T5K6 / 2200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 T5K6 / 2200 AFX and any equivalents.
This is an Optibelt Alpha Flex timing belt, part number 16 T5K6 / 2200 AFX. It is a synchronous belt with a T5 profile, a 2200 mm length and a 5 mm pitch. Timing belts of this type are used where two shafts must stay in step, so the belt teeth mesh with matching pulley grooves instead of relying on friction.
Confirming fit starts with the drive itself. Read the marking on the back of the old belt and compare it against the profile, length and pitch shown here. Check the pulley grooves for wear, the flanges for damage, and the tensioner and idler bearings for play or noise. A belt that has run out of alignment or lost tension will usually show edge wear or a glazed tooth surface.
If the drive runs more than one belt, replace the full set so the load stays even across the grooves. Keep the pulleys clean and free of oil or debris, and set tension to the drive manufacturer's specification rather than by feel. On any timing drive, verify the shaft timing marks before and after the change.
To request a quote, send the part number 16 T5K6 / 2200 AFX by WhatsApp or email. If you are working from a worn belt, include a photo of the back marking and the pulley, and our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 2200mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Match the profile, length and pitch to the marking on the old belt and to the pulley grooves. The belt in question is T5 profile, 2200 mm long, with a 5 mm pitch.
- Should I replace more than one belt at a time?
- On a multi-belt drive, replace the full set together so each belt carries an equal share of the load. Mixing a new belt with worn ones usually shortens the life of the set.
- What should I send for a quote?
- Send the part number 16 T5K6 / 2200 AFX by WhatsApp or email. A photo of the back marking and the pulley helps us confirm the right belt or suggest an equivalent.