Timing belt Optibelt 16 T5 / 10600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 T5 / 10600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 T5 / 10600 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 16 T5 / 10600 AFX. It uses a T5 profile with a 5 mm pitch and a 10600 mm length. It is a synchronous belt intended for drives where tooth engagement and length are the primary selection criteria.
Timing belts in this class are used on drives that require synchronization between the pulley teeth and the belt teeth. Because the profile and pitch determine how the belt seats in the pulleys, the T5 profile and 5 mm pitch must match the drive components exactly. The 10600 mm length is the second critical dimension, so confirm the required length against the drive layout before ordering.
To confirm fit, read the marking on the back of the existing belt and compare it with 16 T5 / 10600 AFX. Check that the belt is a T5 profile with a 5 mm pitch and that the length matches 10600 mm. If the marking is worn or unreadable, measure the length and identify the profile from the pulley teeth. Send the part number or these details by WhatsApp or email and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 10600mm
Frequently asked questions
- How do I confirm this Optibelt 16 T5 / 10600 AFX belt fits my drive?
- Check the marking on the back of the existing belt. It should show the same code. If it does not, verify that the drive uses a T5 profile with a 5 mm pitch and that the required length is 10600 mm.
- What information should I send for a quote?
- Send the part number 16 T5 / 10600 AFX, or the profile, pitch and length from the old belt. If the marking is unreadable, send the pulley profile and the measured length.
- Can you help if the exact belt is not what I need?
- Yes. Send the details of your drive and the old belt marking. We will help confirm the correct belt or suggest an equivalent.