Timing belt Optibelt 16 T20 / 2500 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 T20 / 2500 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 T20 / 2500 AFX and any equivalents.
The Optibelt 16 T20 / 2500 AFX is a timing belt in the Alpha Flex series, built on a T20 profile with a 2500 mm length and a 20 mm pitch. The T20 profile and the 2500 mm length are the two figures that decide whether this belt fits your drive.
The marking on the back of the belt is the fastest way to confirm what you are replacing. Read the profile and the length from that marking and compare them with the T20 profile and 2500 mm length on this page. If the figures match, this is the belt to quote. If only one of them matches, the drive takes a different belt and the other figure needs to be checked before ordering.
Because the profile and the length are fixed, this belt suits a drive that was built around those two dimensions. Pull the old belt and check the tooth profile against the pulleys, then check the length against the run. A belt that is close but not exact will not seat correctly on the teeth, so the profile and the length both need to be right.
For a quote, send the part number 16 T20 / 2500 AFX, or send the marking from the back of the old belt along with the profile and length you measured. If the number on your belt does not match, send it anyway and our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- T20
- Pitch
- 20mm
- Length
- 2500mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The T20 profile sets the tooth shape and the 20 mm pitch sets the spacing between teeth. The 2500 mm length sets how far the belt runs around the drive. All three need to match your application.
- How do I confirm this is the belt on my drive?
- Read the marking on the back of the old belt. If it shows the T20 profile and a 2500 mm length, this belt matches those figures.
- What should I send to request a quote?
- Send the part number 16 T20 / 2500 AFX, or the marking from the back of the old belt with the profile and length you measured. Our team replies by WhatsApp or email.