Timing belt Optibelt 16 T10 / 8800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 T10 / 8800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 T10 / 8800 AFX and any equivalents.
The Optibelt 16 T10 / 8800 AFX is a timing belt in the Alpha Flex series with a T10 profile, an 8800 mm length and a 10 mm pitch. Before you fit it, inspect the drive and the sheaves so the new belt starts on a sound system.
A timing belt wears to the drive it runs on. Check the sheaves for worn grooves, burrs, corrosion or buildup, and confirm they are clean and aligned. Look at the shafts, bearings and tensioner for play, noise or rough rotation, and correct any fault before the belt goes on.
Confirm the marking on the old belt matches the Optibelt 16 T10 / 8800 AFX: T10 profile, 8800 mm length, 10 mm pitch. If the old belt is worn or unreadable, measure the drive and the sheave grooves, then send that information with your quote request so the team can confirm the right belt.
For a quote, send the part number 16 T10 / 8800 AFX, the quantity, and any details from the drive nameplate or the old belt marking. Photos of the belt back and the sheaves help the team confirm the profile and length.
Dimensions
- Profile
- T10
- Pitch
- 10mm
- Length
- 8800mm
Frequently asked questions
- What checks should I make before fitting this belt?
- Inspect the sheaves for wear, damage or buildup, check alignment, and look for play or roughness in the bearings and tensioner. Correct any issue first so the new belt is not damaged at startup.
- How do I confirm the 16 T10 / 8800 AFX is the right belt?
- Compare the marking on the old belt with the T10 profile, the 8800 mm length and the 10 mm pitch. If the marking is not readable, measure the drive and send the details with your request.
- What do you need to quote this belt?
- Send the part number 16 T10 / 8800 AFX and the quantity by WhatsApp or email. Details from the drive nameplate or photos of the old belt and sheaves help confirm the correct item.