Timing belt Optibelt 16 T10 / 8200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 T10 / 8200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 T10 / 8200 AFX and any equivalents.
The Optibelt 16 T10 / 8200 AFX is a timing belt from the Alpha Flex series, built on a T10 profile with a 10 mm pitch and an 8200 mm length. Before you fit it, take the time to inspect the drive and its sheaves. A belt this long will follow the condition of the pulleys it runs on.
Start with the sheaves. Check the tooth flanks for wear, the grooves for embedded debris, and the sidewalls for damage that would let the belt sit off-centre. Confirm the pulleys are aligned to each other and that the shafts turn freely, since misalignment and a tight bearing will shorten the life of any new belt.
Then look at the rest of the drive. Check the tensioner and idler for smooth rotation and correct setting, and inspect the belt path for anything that could rub the back or edges of the belt. If the old belt failed early, the cause is usually in the drive rather than the belt itself.
The marking on the back of the old belt is the quickest way to confirm you are ordering the same size. Read the profile, pitch and length from it and send those details, along with the part number and the quantity you need, by WhatsApp or email. We carry Optibelt and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- T10
- Pitch
- 10mm
- Length
- 8200mm
Frequently asked questions
- What are the profile, pitch and length of this belt?
- It is a T10 profile timing belt with a 10 mm pitch and an 8200 mm length, part number 16 T10 / 8200 AFX from the Optibelt Alpha Flex series.
- Should I check the sheaves before fitting a new belt?
- Yes. Worn tooth flanks, debris in the grooves, misalignment between pulleys and a stiff bearing will all affect how a new belt runs. Inspecting the drive first helps you avoid a repeat failure.
- How do I request a quote?
- Send the part number 16 T10 / 8200 AFX and the quantity you need by WhatsApp or email. If you are replacing an existing belt, the marking on its back is useful for confirming the size.