Timing belt Optibelt 16 T10 / 6800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 T10 / 6800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 T10 / 6800 AFX and any equivalents.
This Optibelt Alpha Flex timing belt carries the part number 16 T10 / 6800 AFX. It has a T10 profile with a 10 mm pitch and a 6800 mm length. Before you fit it, inspect the drive and the sheaves so the new belt runs true from the first turn.
A timing belt that fails early often follows a sheave problem that was there all along. Check the tooth flanks for wear, look for debris packed into the grooves, and confirm the sheaves are aligned. Any roughness or runout will shorten the life of the replacement belt, whatever its profile or length.
On a long T10 drive, the belt path and tension matter as much as the belt itself. Spin the drive by hand where you can, listen for noise, and check that the flanges and guides are not rubbing. Once the drive is clean and aligned, fit the Optibelt 16 T10 / 6800 AFX and tension it to your standard for this profile and length.
For a quote, send the part number 16 T10 / 6800 AFX by WhatsApp or email. If you are replacing a belt that is worn or unmarked, send the profile and length from the old belt or a photo of the back marking. We carry Optibelt and can confirm the belt against your drive details.
Dimensions
- Profile
- T10
- Pitch
- 10mm
- Length
- 6800mm
Frequently asked questions
- What are the profile and length of this belt?
- It is a T10 profile timing belt with a 10 mm pitch and a 6800 mm length, part number 16 T10 / 6800 AFX.
- What should I check before fitting it?
- Inspect the sheaves for worn tooth flanks, debris in the grooves, and alignment. Check the belt path, flanges and guides, then tension the new belt to your standard for this profile and length.
- How do I request a quote?
- Send the part number 16 T10 / 6800 AFX by WhatsApp or email. If the old belt is unmarked, include the profile and length or a photo of the back marking so we can confirm it.