Timing belt Optibelt 16 T10 / 2000 AFX

OPTIBELT 16 T10 / 2000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 T10 / 2000 AFX and any equivalents.

This Optibelt Alpha Flex timing belt is identified by the code 16 T10 / 2000 AFX. It uses a T10 profile with a 10 mm pitch and a 2000 mm length. It is a synchronous belt intended for drives where tooth engagement, not friction, carries the load.

Timing belts of this type are common on industrial drives that need synchronized motion between shafts: cam drives, positioning axes, and other equipment where slip cannot be tolerated. The T10 profile and 10 mm pitch define the tooth geometry and spacing, while the 2000 mm length sets the belt's path around the pulleys. Confirm that your drive uses a T10 pulley and that the required belt length is 2000 mm before ordering.

The most reliable way to confirm fit is to read the marking on the back of the old belt. If it shows 16 T10 / 2000 AFX, this is the same belt. If the marking is worn or unreadable, measure the old belt's length and count the teeth or check the pulley profile. Send the part number, the belt marking, or photos of the belt and pulleys, and we will help confirm the correct belt or suggest an equivalent.

When replacing a timing belt, inspect the pulleys for worn teeth, debris, or misalignment, and check the tensioner and idler bearings. On drives with more than one belt, replace the set together so the belts share the load evenly. We carry the Optibelt Alpha Flex line and can quote this belt by part number.