Timing belt Optibelt 16 AT5K6 / 9200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 AT5K6 / 9200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 AT5K6 / 9200 AFX and any equivalents.
The Optibelt 16 AT5K6 / 9200 AFX is an Alpha Flex timing belt with an AT5 profile, a 9200 mm length and a 5 mm pitch. Before you install it, inspect the drive and the sheaves so the new belt runs on clean, true surfaces.
Check the sheaves for worn grooves, burrs, corrosion or build-up that can damage the belt teeth. Confirm the sheave profile matches the AT5 profile and that the two sheaves are aligned. Any misalignment or runout will shorten belt life, no matter how good the belt is.
Look at the rest of the drive while you are in there. Spin the sheaves by hand and feel for rough or noisy bearings. Check that the shafts do not move and that the structure holding the sheaves is tight. If you find a problem, fix it before you fit the new belt.
When you are ready to order, send the part number 16 AT5K6 / 9200 AFX by WhatsApp or email. If you want us to confirm it is the right belt for your drive, include the belt marking, the sheave profile and the center distance.
Dimensions
- Profile
- AT5
- Pitch
- 5mm
- Length
- 9200mm
Frequently asked questions
- What does the marking on this belt tell me?
- The marking shows the Optibelt part number 16 AT5K6 / 9200 AFX. The profile is AT5, the length is 9200 mm and the pitch is 5 mm. Use these values to compare with the belt you are replacing.
- How do I request a quote for this belt?
- Send the part number 16 AT5K6 / 9200 AFX by WhatsApp or email. If you also send the belt marking and the sheave profile, we can confirm the match.
- Should I replace both belts on a drive at the same time?
- If the drive uses two belts, replace them as a set. A new belt running with a worn belt can cause uneven loading. Check the sheaves before fitting the new set.