Timing belt Optibelt 16 AT5 / 9400 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 AT5 / 9400 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 AT5 / 9400 AFX and any equivalents.
This Optibelt Alpha Flex belt is a timing belt with an AT5 profile and a 9400 mm length. It is built for synchronous drives where the belt teeth mesh with a matching pulley to keep motion timed. Use the part number 16 AT5 / 9400 AFX when you request a quote.
Timing belts like this one are common on drives that must stay in step, such as positioning axes, linear actuators and other equipment where slip is not acceptable. The AT5 profile and 5 mm pitch define the tooth shape and spacing, so the pulleys on the drive must match that profile. The 9400 mm length is the datum to check against the old belt or the machine's belt routing.
To confirm fit, read the marking on the back of the belt you are replacing and compare it with 16 AT5 / 9400 AFX. Check that the profile is AT5 and the length is 9400 mm. If the marking is worn or unreadable, measure the old belt and note the tooth profile and the number of teeth so we can help you match it.
Send the part number, the profile and the length by WhatsApp or email and our team will reply promptly. If you are unsure about the exact belt, include a photo of the back marking and the pulley teeth. We can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- AT5
- Pitch
- 5mm
- Length
- 9400mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the marking on the back of the belt you are replacing. It should read 16 AT5 / 9400 AFX, or show an AT5 profile and a 9400 mm length. Also confirm the pulleys are cut for the AT5 profile.
- What does the AT5 profile mean for matching pulleys?
- AT5 is the tooth profile of the belt, and this belt has a 5 mm pitch. The pulley grooves must be made for the same AT5 profile and pitch so the teeth engage correctly.
- What should I send to request a quote?
- Send the part number 16 AT5 / 9400 AFX, the profile AT5 and the length 9400 mm. If you have the old belt, a photo of the back marking helps us confirm the match.