Timing belt Optibelt 16 AT5 / 5600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 AT5 / 5600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 AT5 / 5600 AFX and any equivalents.
The Optibelt 16 AT5 / 5600 AFX is an Alpha Flex timing belt with an AT5 profile and a 5600 mm length. The 5 mm pitch defines the tooth spacing along the belt, while the AT5 profile identifies the tooth shape used in the drive. Use these two values to confirm the belt matches the pulleys and the routing on your equipment.
When you read the marking on the back of the belt, the profile and length are the first items to verify. The AT5 profile must match the pulley groove, and the 5600 mm length must match the drive's center distance and idler arrangement. The 5 mm pitch is the distance from one tooth center to the next, so it is fixed by the profile and is not a separate measurement you adjust.
For a quote, send the part number 16 AT5 / 5600 AFX and the quantity you need. If you are replacing a belt that is no longer legible, send photos of the back marking and the pulley teeth, plus the width and the number of teeth if you can count them. The team can confirm the profile and length and help you identify the correct replacement.
Dimensions
- Profile
- AT5
- Pitch
- 5mm
- Length
- 5600mm
Frequently asked questions
- What do the profile and length mean on this belt?
- The AT5 profile describes the tooth shape that engages the pulley grooves, and 5600 mm is the belt length. The 5 mm pitch is the center-to-center distance between adjacent teeth.
- How do I confirm this is the right belt for my drive?
- Check that the pulley grooves match the AT5 profile and that the 5600 mm length matches the drive layout. If the old belt is marked 16 AT5 / 5600 AFX, that is the reference to match.
- What should I send to request a quote?
- Send the part number 16 AT5 / 5600 AFX and the quantity. If you are unsure, include photos of the old belt's back marking and the pulleys, along with the belt width and tooth count.