Timing belt Optibelt 16 AT5 / 11400 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 AT5 / 11400 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 AT5 / 11400 AFX and any equivalents.
The Optibelt 16 AT5 / 11400 AFX is a timing belt in the Alpha Flex series. It uses an AT5 profile with a 5 mm pitch and a length of 11400 mm. This type of synchronous belt is common on long-span drives where exact positioning and low noise matter.
Use this page to confirm the belt on your equipment. Check the back of the old belt for the marking 16 AT5 / 11400 AFX, then compare the profile (AT5), pitch (5 mm) and length (11400 mm) with the data here. If the marking is worn, measure the old belt and note the tooth profile before ordering.
Timing belts in this size range are often found on wide-format printers, plotter tables, automated handling axes and other linear motion systems. Because these drives depend on tooth engagement for positioning, an incorrect profile or length will not run correctly. We carry the Optibelt 16 AT5 / 11400 AFX and can help you confirm it against your drive.
To request a quote, send the part number 16 AT5 / 11400 AFX by WhatsApp or email. If you are unsure about the belt, include a photo of the back marking and the pulley area. Our team replies promptly and can help confirm the right belt for your application.
Dimensions
- Profile
- AT5
- Pitch
- 5mm
- Length
- 11400mm
Frequently asked questions
- How do I confirm that the 16 AT5 / 11400 AFX is the correct belt?
- Look for the marking on the back of the old belt. The profile AT5, pitch 5 mm and length 11400 mm must match your drive. If the marking is not readable, measure the old belt and check the pulley profile.
- What should I send to get a quote?
- Send the part number 16 AT5 / 11400 AFX by WhatsApp or email. If you are replacing a belt without a clear marking, include the belt width and a photo of the drive.
- Can you help if I am not sure about the profile?
- Yes. Send a photo of the old belt and the pulleys. We can review the AT5 profile and 11400 mm length against your setup and help confirm the right belt.