Timing belt Optibelt 16 AT20 / 8800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 AT20 / 8800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 AT20 / 8800 AFX and any equivalents.
The Optibelt 16 AT20 / 8800 AFX is a timing belt from the Alpha Flex series with an AT20 profile and an 8800 mm length. Before you fit it, inspect the drive and the sheaves so the new belt runs true from the first start. Send the part number to MR Industrial Accessories for a quote.
Check the sheaves first. Look for worn grooves, burrs, corrosion or buildup that can damage the belt teeth or change the pitch line. Confirm the sheave profile matches the AT20 pitch of 20 mm. Any misalignment between sheaves will shorten belt life, so correct it before the belt goes on.
Then check the rest of the drive. Turn the shafts by hand, confirm bearings run smoothly, and make sure the take-up range allows correct tension. If the old belt failed early, the cause is often in the drive rather than the belt itself. Fix those points first, then install the Optibelt 16 AT20 / 8800 AFX.
When you request a quote, send the part number 16 AT20 / 8800 AFX and the quantity you need. If you are unsure whether this is the right belt for your drive, include the profile and length from the old belt marking, and the MR team will help confirm the match.
Dimensions
- Profile
- AT20
- Pitch
- 20mm
- Length
- 8800mm
Frequently asked questions
- What are the profile and length of this belt?
- The Optibelt 16 AT20 / 8800 AFX has an AT20 profile and a length of 8800 mm, with a pitch of 20 mm.
- What should I check before fitting this timing belt?
- Inspect the sheaves for wear, burrs, corrosion or buildup, confirm the sheave profile matches the AT20 pitch, check alignment between sheaves, turn the shafts by hand to check bearings, and make sure the take-up range allows correct tension.
- How do I request a quote for this belt?
- Send the part number 16 AT20 / 8800 AFX and the quantity you need to MR Industrial Accessories by WhatsApp or email. If you are unsure about the match, include the profile and length from the old belt marking.