Timing belt Optibelt 16 AT20 / 2900 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 AT20 / 2900 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 AT20 / 2900 AFX and any equivalents.
The Optibelt 16 AT20 / 2900 AFX is a timing belt from the Alpha Flex series, built to an AT20 profile with a 2900 mm length and a 20 mm pitch. This page covers how to match it to the belt you are replacing. We carry this belt for maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America.
The fastest way to confirm a match is to read the marking on the back of the belt you are removing. Compare that marking against the code 16 AT20 / 2900 AFX, then check the profile and the length against the drive: AT20 profile, 2900 mm length, 20 mm pitch. If the old belt is worn or the print has rubbed off, measure the length and count the teeth so the numbers line up with the data above.
A timing belt should be replaced as part of a drive inspection, not on its own. Look at the pulleys for wear or damage, check alignment between the two shafts, and confirm the tensioner is working correctly. If the drive runs more than one belt, replace the full set at the same time so the load stays even across the drive.
To request a quote, send the part number 16 AT20 / 2900 AFX by WhatsApp or email, along with the profile and length from your old belt if you have them. Our team replies promptly and can help confirm the right belt or suggest an equivalent when the exact code is not in hand.
Dimensions
- Profile
- AT20
- Pitch
- 20mm
- Length
- 2900mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Read the marking on the back of the old belt and compare it with 16 AT20 / 2900 AFX. Then verify the AT20 profile, the 2900 mm length and the 20 mm pitch against the drive before ordering.
- What should I check on the drive while the belt is off?
- Inspect the pulleys for wear or damage, check that the shafts are aligned, and confirm the tensioner is working. If the drive uses more than one belt, replace the set together.
- What information do you need to quote this belt?
- Send the part number 16 AT20 / 2900 AFX by WhatsApp or email. If you have the old belt, include the profile and length marked on it so we can confirm the match.