Timing belt Optibelt 16 AT10 / 8600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 AT10 / 8600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 AT10 / 8600 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 16 AT10 / 8600 AFX. It uses the AT10 profile with a 10 mm pitch and an 8600 mm length. Use these three values to confirm the belt on your drive before requesting a quote.
Timing belts in this class are used on synchronous drives where the belt teeth mesh with matching pulleys to keep the driven shaft in step with the driver. The AT10 profile and 10 mm pitch define the tooth form and spacing; the 8600 mm length defines the belt path around the pulleys. Confirm all three against the old belt or the drive documentation.
The most reliable check is the marking on the back of the belt you are replacing. If it reads 16 AT10 / 8600 AFX, this is the same identification. Also check the tooth profile against the pulley grooves and verify the length by routing the belt or measuring the drive.
Send the part number, the belt marking, and the width and tooth count from your drive to MR Industrial Accessories by WhatsApp or email. The team replies promptly and can help confirm the right belt for your application.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 8600mm
Frequently asked questions
- How do I confirm this is the correct belt?
- Match the marking on the back of the old belt to 16 AT10 / 8600 AFX. Also check that the AT10 profile and 10 mm pitch match the pulley grooves and that the 8600 mm length matches the drive path.
- What information should I send for a quote?
- Send the part number 16 AT10 / 8600 AFX, the marking from the old belt, and the width and tooth count from your drive. Photos of the belt and pulleys help confirm the fit.
- Can you help if the marking is worn off?
- Yes. Send the drive details, pulley tooth count and center distance, and the team can help identify the correct Optibelt Alpha Flex timing belt.