Timing belt Optibelt 16 AT10 / 7000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 AT10 / 7000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 AT10 / 7000 AFX and any equivalents.
This Optibelt Alpha Flex belt is a timing belt in the AT10 profile with a 7000 mm length and a 10 mm pitch. Long synchronous belts in this size class are common on wide, slow-turning drives where the belt has to hold position rather than slip, so the fit is set by the profile and the length together.
Confirming fit starts with the marking on the old belt. Read the profile and the length off the back of the belt and match them to the AT10 profile and 7000 mm length shown here. Also check the tooth count on the drive against a 10 mm pitch over that length before you commit to an order.
Since this is a timing belt, the pulleys must be AT10 profile and the center distance must suit a 7000 mm belt. Inspect the pulleys for worn or hooked teeth, and check the flanges and tensioner at the same time, because a belt of this length will not run true on damaged hardware.
For a quote, send the part number 16 AT10 / 7000 AFX, or the profile and length from the belt you are replacing. If you are unsure whether AT10 is the correct profile for your drive, send a photo of the marking and the pulley and the team can help confirm it.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 7000mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Match the profile and length on the back of your current belt to the AT10 profile and 7000 mm length of this one, and confirm the pulleys are AT10 and the pitch is 10 mm. If the marking is worn off, send a photo of the belt and pulley.
- What do I need to send for a quote?
- Send the part number 16 AT10 / 7000 AFX by WhatsApp or email, or give the profile and length from the belt you are replacing. The team replies promptly and can help confirm the right belt.
- Is this belt the same as other AT10 belts?
- Only if the profile, pitch and length match. An AT10 belt of a different length will not fit the same drive, so check the 7000 mm length and the 10 mm pitch before ordering.