Timing belt Optibelt 16 AT10 / 5600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 AT10 / 5600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 AT10 / 5600 AFX and any equivalents.
The Optibelt 16 AT10 / 5600 AFX is a timing belt in the Alpha Flex series. It uses the AT10 profile with a 10 mm pitch and a 5600 mm length. When you are replacing a belt, these three details are what you match first.
Start with the belt you are removing. Read the marking on the back: it should show the profile, the length and the part number. If it reads AT10, 5600 mm and 10 mm pitch, this Optibelt belt is the same size. Compare the width code and the part number as well, since two belts can share a profile and length but differ in other ways.
If the old marking is worn or missing, measure what you can. Confirm the profile by checking the tooth shape against the pulley groove, and confirm the length by measuring around the belt path. The 16 AT10 / 5600 AFX is a specific combination, so a belt that is close but not exact is not a match.
For a quote, send the part number 16 AT10 / 5600 AFX, or send the full marking from the old belt. If you have the profile, length and pitch, include those too. Our team can confirm the belt or suggest an equivalent.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 5600mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the belt you are replacing. It should show AT10, 5600 mm and 10 mm pitch. If it does, the Optibelt 16 AT10 / 5600 AFX matches those dimensions. Also compare the part number and width code.
- What if the old belt marking is unreadable?
- Measure the length around the belt path and check the tooth profile against the pulley. The profile is AT10, the pitch is 10 mm and the length is 5600 mm. If your measurements match, this is the correct size.
- What information should I send for a quote?
- Send the part number 16 AT10 / 5600 AFX, or the complete marking from the old belt. If you have the profile, length and pitch, include those as well. We will confirm the belt or suggest an equivalent.