Timing belt Optibelt 16 / AT10 3000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 / AT10 3000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 / AT10 3000 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 16 / AT10 3000 AFX. It uses the AT10 profile with a 10 mm pitch and a 3000 mm length. Use these three values to confirm the belt matches your drive before you request a quote.
Timing belts in the AT10 profile are common on industrial drives where synchronization between shafts must be maintained, such as positioning axes, conveyors and other power transmission arrangements that call for a positive drive. The 10 mm pitch and 3000 mm length define the geometry of this belt, so both figures should be checked against the marking on the belt you are replacing or against the drive documentation.
To confirm fit, read the belt currently on the machine. Look for the profile, the pitch and the length, and compare them with AT10, 10 mm and 3000 mm. Also check the width designation shown in the code, 16, against the width of the pulley groove. If the old belt is worn or the marking is unreadable, measure the outside circumference and count the teeth so the profile and pitch can be verified.
Send the part number 16 / AT10 3000 AFX, or the profile, pitch, length and width you recorded, by WhatsApp or email. The team can help confirm the right belt for your drive and suggest an equivalent when the exact code is not what you need.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 3000mm
Frequently asked questions
- How do I confirm that this belt fits my drive?
- Check the profile, pitch and length against your drive: this belt is AT10, 10 mm pitch and 3000 mm long. The code also shows a width designation of 16, which should match your pulley width. If you are unsure, send the marking from the old belt or your measurements for confirmation.
- What should I send to request a quote?
- Send the part number 16 / AT10 3000 AFX. If you do not have the number, send the profile, pitch, length and width you read from the belt or the drive documentation. Photos of the belt marking are also helpful.
- Can you suggest an equivalent if this exact belt is not what I need?
- Yes. Provide the profile, pitch, length and width of the belt you are replacing, and the team can help confirm the right belt or suggest an equivalent.