Timing belt Optibelt 16 AT10 / 2000 AFX

OPTIBELT 16 AT10 / 2000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 AT10 / 2000 AFX and any equivalents.

This Optibelt Alpha Flex belt is a timing belt with an AT10 profile, a 2000 mm length and a 10 mm pitch. It is used on drives that need synchronous power transmission, where the belt teeth mesh with matching pulleys to keep the driven shaft in step with the driver. If you are replacing a worn belt or specifying one for a new drive, start with the profile and length on the old belt.

Confirm fit by reading the marking on the back of the belt and comparing it with the profile and length above. The AT10 profile and 2000 mm length identify the tooth form and the belt's outside length; the 10 mm pitch is the distance from one tooth center to the next. A belt with the same profile and length but a different width will not match the pulleys, so check the width of the old belt as well.

Timing belts in this size range are common on industrial drives where shaft synchronization matters, such as positioning axes, conveyors and other equipment with toothed pulleys. Inspect the pulleys at the same time: worn teeth, damaged flanges or misalignment will shorten the life of a new belt. If you are replacing more than one belt on a multi-belt drive, replace them as a set so the load stays even.

To request a quote, send the part number 16 AT10 / 2000 AFX by WhatsApp or email. Include the width of the belt you are replacing and, if the marking is worn, a photo of the back of the belt and the pulley. Our team carries Optibelt and will confirm the belt or suggest an equivalent.