Timing belt Optibelt 1540 14M 170 HIPO
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1540 14M 170 HIPO belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1540 14M 170 HIPO and any equivalents.
When you need to replace a timing belt, the marking on the back of the old belt is the most reliable starting point. This page covers the Optibelt 1540 14M 170 HIPO belt, an HTD 14M profile synchronous belt with a 1540 mm length and 14 mm pitch. Use the data below to confirm it matches your drive before you request a quote.
The Optibelt 1540 14M 170 HIPO is part of the Omega High Power series. Its profile is HTD 14M, its length is 1540 mm, and its pitch is 14 mm. These three values are what you compare against the old belt's back marking. If the marking reads 1540 14M 170 HIPO, this is the belt to quote.
Before ordering, inspect the drive: check pulley grooves for wear, confirm the belt sits correctly, and verify that both pulleys are aligned. A worn pulley or misalignment can shorten the life of a new synchronous belt. If the old belt's marking is faded or unreadable, measure the length and count the teeth to identify the profile and pitch.
To request a quote, send the complete part number 1540 14M 170 HIPO by WhatsApp or email. If you are unsure whether this is the correct belt for your application, include a photo of the old belt's marking and the pulley details. Our team will confirm the belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 1540mm
Frequently asked questions
- How do I read the marking on my old timing belt?
- Look for a series of numbers and letters on the back of the belt. For this Optibelt belt, the marking is 1540 14M 170 HIPO. The 1540 indicates the length in millimeters, 14M indicates the HTD profile and 14 mm pitch, and HIPO identifies the Omega High Power series.
- What should I check on the drive before replacing this belt?
- Inspect the pulley grooves for wear or damage, check that the belt tracks correctly, and verify pulley alignment. Worn or misaligned components can cause premature belt failure, so addressing them during replacement helps ensure reliable operation.
- What information do I need to send for a quote?
- Send the full part number 1540 14M 170 HIPO. If you want us to confirm it is the right belt for your drive, also include a photo of the old belt's marking and details of the pulleys, such as tooth count and profile.