Timing belt Optibelt 1530 3M 6
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- HTD
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1530 3M 6 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1530 3M 6 and any equivalents.
This Optibelt HTD 3M timing belt is identified by the part number 1530 3M 6. It is a synchronous belt with an HTD 3M profile, a 1530 mm length and a 3 mm pitch. Use the profile and length to confirm it matches the drive before you order.
HTD 3M timing belts are used on drives where the belt teeth mesh with matching pulleys to keep the driven shaft in step with the drive. In maintenance and plant work you will find this type on compact, low-power transmissions and positioning drives. Because the profile is HTD 3M, the pulleys must be cut for the same 3M tooth form.
To confirm fit, read the marking on the back of the old belt and compare the profile and length to this belt. Check that the belt path, pulley grooves and width match what the drive requires. If the old marking is worn or unreadable, measure the belt and note the tooth profile.
When you request a quote, send the part number 1530 3M 6, the profile HTD 3M, the length 1530 mm and the pitch 3 mm. If you are replacing more than one belt on the same drive, include the quantity and the position of each belt. We carry Optibelt and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 1530mm
Frequently asked questions
- What does the part number 1530 3M 6 identify?
- It identifies an Optibelt HTD 3M timing belt with a 1530 mm length and a 3 mm pitch. The profile is HTD 3M.
- How do I confirm this belt fits my drive?
- Compare the profile and length on the old belt marking to this belt. The pulleys must match the HTD 3M profile, and the belt path and width must suit the drive.
- What should I send with my quote request?
- Send the part number 1530 3M 6, the profile HTD 3M, the length 1530 mm and the pitch 3 mm. If you need more than one, include the quantity.