Timing belt Optibelt 1500 3M 9
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- HTD
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1500 3M 9 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1500 3M 9 and any equivalents.
This Optibelt HTD timing belt is part of the HTD series and carries the part number 1500 3M 9. It is a synchronous belt with an HTD 3M profile, a 1500 mm length, and a 3 mm pitch, used where exact timing and positive engagement are required.
HTD timing belts are common on compact drives in industrial machinery, office equipment, and light-duty power transmission systems. The rounded tooth profile of the HTD 3M belt is designed to mesh with matching HTD pulleys, so confirming the pulley groove profile is the first step when checking fit. The belt marking on the back, 1500 3M 9, identifies the profile and length you need to match.
To confirm this belt fits your drive, compare the profile and length from the existing belt. The HTD 3M profile and 1500 mm length must match the pulley and the required center distance. If the old belt is worn or the marking is unreadable, measure the pitch length and count the pulley grooves to verify the 3 mm pitch. Send the part number 1500 3M 9 and any photos of the old belt and pulley to our team for a prompt quote.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 1500mm
Frequently asked questions
- What does the part number 1500 3M 9 refer to?
- The part number identifies this as an Optibelt HTD 3M timing belt with a 1500 mm length and a 3 mm pitch. The profile is HTD 3M.
- How can I confirm this belt fits my drive?
- Check that your pulleys are HTD 3M profile and that the required belt length is 1500 mm. If you are replacing an existing belt, compare the marking on the back of the belt or measure the pitch length.
- What information should I send for a quote?
- Send the part number 1500 3M 9 and, if possible, the old belt marking, the pulley profile, and the number of teeth on each pulley. Our team will confirm the belt or suggest an equivalent.