Timing belt Optibelt 150 T10 / 11000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 150 T10 / 11000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 150 T10 / 11000 AFX and any equivalents.
This Optibelt Alpha Flex belt is a timing belt with a T10 profile, a 10 mm pitch and an 11000 mm length. It is used where synchronous drive power transmission is required over a long center distance. Confirm fit by matching the profile and length to your drive.
On long-span drives, the belt type and profile determine how it seats in the pulleys and how it handles the load. The T10 profile and 10 mm pitch define the tooth geometry, while the 11000 mm length sets the center distance. This belt is specified by its part number 150 T10 / 11000 AFX, which you can read from the back of the old belt or from the drive documentation.
To confirm this is the correct replacement, check the marking on the existing belt and compare the profile and length. If the old belt is worn or the marking is unreadable, measure the length and identify the profile from the pulley grooves. The part number is the most reliable reference.
When you request a quote, send the complete part number 150 T10 / 11000 AFX and the quantity you need. If you are unsure, include the profile and length from your drive. We carry Optibelt Alpha Flex belts and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- T10
- Pitch
- 10mm
- Length
- 11000mm
Frequently asked questions
- What does the part number 150 T10 / 11000 AFX identify?
- It identifies an Optibelt Alpha Flex timing belt with a T10 profile, a 10 mm pitch and an 11000 mm length. Use this number when requesting a quote.
- How do I confirm this belt fits my drive?
- Check the marking on the back of the old belt. The profile and length must match T10 and 11000 mm. If the marking is not readable, measure the belt length and check the pulley profile.
- What information should I send with my quote request?
- Send the part number 150 T10 / 11000 AFX and the quantity. If you are replacing a belt without a readable number, send the profile and length from your drive.