Timing belt Optibelt 150 / H 1140 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 150 / H 1140 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 150 / H 1140 AFX and any equivalents.
The Optibelt 150 / H 1140 AFX is a timing belt from the Alpha Flex series, with an H profile and a length of 2895.6 mm. Before you fit it, take time to inspect the drive and sheaves. A worn sheave or misaligned pulley will shorten the life of any new belt, no matter how good the belt is.
Start by checking the sheaves for wear. Look for grooves that have become hooked or polished, and for ridges or burrs on the flanges. Run a straightedge across the pulley face to spot misalignment. If the sheaves are worn past their useful life, a new timing belt will not run true and may fail early. Also check the bearings and the shaft for play, and confirm that the drive is free of debris or buildup that could interfere with the belt.
When you are ready to install, make sure the belt is not forced over the flanges. Release the tensioner fully, fit the belt by hand, and then tension it according to the drive manufacturer's specification. Rotate the drive by hand for a few turns to seat the belt, then recheck the tension. Keep the belt clean and free of oil or grease. Store it flat and away from direct sunlight until it is needed.
Dimensions
- Profile
- H
- Length
- 2895.6mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheaves for wear, hooking, and burrs, check alignment with a straightedge, and verify that bearings and shafts have no play. Clean the drive area and remove any debris. Correct any issues before installing the new belt.
- How do I identify the correct replacement?
- Use the part number 150 / H 1140 AFX. The belt is an Optibelt Alpha Flex timing belt with an H profile and a length of 2895.6 mm. If you need help confirming the right belt, send the part number and a photo of the old belt's marking to our team.
- Can you help me confirm this belt for my application?
- Yes. Send us the part number 150 / H 1140 AFX, the drive details, and the old belt marking. Our team will review the information and reply promptly with a quote or a suggested equivalent.