Timing belt Optibelt 150 AT10 / 2900 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 150 AT10 / 2900 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 150 AT10 / 2900 AFX and any equivalents.
The Optibelt 150 AT10 / 2900 AFX is an Alpha Flex timing belt with an AT10 profile, a 2900 mm length and a 10 mm pitch. To match it to the belt you are replacing, read the marking on the back of the old belt and compare profile, length and pitch against this listing.
Start with the belt currently on the drive. Note the profile, the length in millimeters and the pitch, then set them against the AT10 profile, 2900 mm length and 10 mm pitch of this Optibelt Alpha Flex belt. If the old marking is worn or unreadable, measure the length along the belt and check the tooth profile against the pulley grooves.
The part number 150 AT10 / 2900 AFX identifies this belt in the Optibelt Alpha Flex line. When you request a quote, send that full part number so we can confirm it matches your application. If the number on your old belt differs, send that number as well and we will compare the two.
For drives that run more than one belt, replace the full set at the same time so the load stays even across the pulleys. Inspect the pulleys for worn grooves or debris before installing the new belt, and check the tension after the first run-in period.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 2900mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Compare the profile, length and pitch on the old belt with the AT10 profile, 2900 mm length and 10 mm pitch of this Optibelt belt. If the old marking is unreadable, measure the length and check the tooth shape against the pulley grooves.
- What should I send to request a quote?
- Send the part number 150 AT10 / 2900 AFX, along with the quantity you need. If you have the old belt, include the number marked on it so we can cross-check the profile and length.
- Should I replace more than one belt at a time?
- On drives that use multiple belts, replace the full set together so tension and load remain even. Inspect the pulleys for wear or debris before installation.