Timing belt Optibelt 150 AT10 / 2500 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 150 AT10 / 2500 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 150 AT10 / 2500 AFX and any equivalents.
This Optibelt Alpha Flex belt is a timing belt with an AT10 profile, a 2500 mm length and a 10 mm pitch. It is used on synchronous drives where the belt teeth mesh with matching pulleys to keep the driven shaft in step with the drive.
When confirming fit, work from the marking on the old belt and the drive itself. The AT10 profile and the 2500 mm length are the two dimensions to match; the 10 mm pitch describes the spacing between the teeth. Check that the pulleys carry the same profile and that the belt path and tensioner allow the same length to be fitted.
Timing belts of this type are found on drives that must stay synchronized rather than simply transmit power. If the existing belt is worn, cracked or showing exposed cord, replace it before the drive loses timing. Inspect the pulleys for wear or damage at the same time, since a worn pulley profile will shorten the life of a new belt.
To request a quote, send the part number 150 AT10 / 2500 AFX by WhatsApp or email. If you are unsure whether this is the correct belt for your drive, include the marking from the back of the old belt and the pulley details, and the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 2500mm
Frequently asked questions
- What does the AT10 profile mean for fit?
- AT10 is the profile of this Optibelt Alpha Flex timing belt. The pulleys on your drive must take the same profile, and the belt length must match the 2500 mm listed here for the belt to run correctly.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt and compare it with 150 AT10 / 2500 AFX. Also check the pulley profile and the belt path. If anything is unclear, send the old marking and pulley details with your quote request.
- What should I send with my quote request?
- Send the part number 150 AT10 / 2500 AFX by WhatsApp or email. If you are replacing an existing belt, include the marking from the back of the old belt and the pulley details so the team can confirm the match.