Timing belt Optibelt 15 / 5M 7400 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 15 / 5M 7400 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 15 / 5M 7400 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by its HTD 5M profile and 7400 mm length. The 5 mm pitch defines the spacing between teeth, so it must match your pulley exactly. Use these three values to confirm the belt your drive requires.
The part number 15 / 5M 7400 AFX combines the profile, pitch, and length. HTD 5M is a synchronous profile with a 5 mm pitch, and the 7400 mm length is the belt's outside circumference. The 15 indicates the belt width in millimeters. If your old belt is marked with these figures, this is the correct replacement.
When ordering, send the complete part number 15 / 5M 7400 AFX, the profile HTD 5M, the length 7400 mm, and the pitch 5 mm. If the marking is worn, measure the pitch and length and send photos of the pulley and the belt back. We carry the Optibelt Alpha Flex line and can confirm the match or suggest an equivalent.
This is a synchronous belt for drives that require precise positioning and speed control. It is not a V-belt or a serpentine belt. Check that your pulleys are HTD 5M and that the belt width matches the pulley groove before installing.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 7400mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The HTD 5M profile means the belt has a 5 mm pitch and fits HTD 5M pulleys. The 7400 mm length is the belt's outside circumference. Both must match your drive for proper fit and operation.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of your old belt. It should show the profile HTD 5M, the length 7400 mm, and the pitch 5 mm. If the marking is unreadable, measure the pitch and length and send photos of the belt and pulleys for verification.
- What information should I send to request a quote?
- Send the part number 15 / 5M 7400 AFX, the profile HTD 5M, the length 7400 mm, and the pitch 5 mm. If you need an equivalent, include the old belt's marking and the pulley details.