Timing belt Optibelt 15 / 5M 6000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 15 / 5M 6000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 15 / 5M 6000 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 15 / 5M 6000 AFX. It uses the HTD 5M profile with a 6000 mm length and a 5 mm pitch. Use the markings on the belt and the drive specifications to confirm it matches your application.
HTD 5M timing belts are common in drives where synchronization between the pulley and belt is required. The 5 mm pitch and 6000 mm length define the geometry that must match your pulleys and center distance. Before ordering, check the old belt for the same code and confirm the profile and length.
If the marking is worn or missing, measure the belt width and count the teeth if possible. The profile and length are the critical dimensions. Provide the complete part number 15 / 5M 6000 AFX when requesting a quote so we can confirm the correct belt for your drive.
For drives with multiple belts, replace all belts at the same time to maintain equal tension. Inspect pulleys for wear or damage that could affect belt life. If you need help identifying the right belt, send the belt code, profile, length, and width.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 6000mm
Frequently asked questions
- How do I confirm this timing belt fits my drive?
- Check the marking on the back of the old belt for the same code, or verify the profile (HTD 5M), pitch (5 mm), and length (6000 mm) against your drive specifications. If uncertain, contact us with the belt code and drive details.
- Can I replace just one belt in a multi-belt drive?
- It is recommended to replace all belts in a set at the same time to ensure even tension and load distribution. Mixing new and used belts can lead to uneven wear and premature failure.
- What information should I provide for a quote?
- Provide the complete part number 15 / 5M 6000 AFX, or the profile, length, and width if the number is not readable. If you have a photo of the old belt or the drive setup, that can also help us confirm the correct replacement.