Timing belt Optibelt 15 / 5M 5000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 15 / 5M 5000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 15 / 5M 5000 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 15 / 5M 5000 AFX. It uses an HTD 5M profile with a 5 mm pitch and a 5000 mm length. It is a synchronous belt for drives that require exact positioning and speed control.
Timing belts like this are common on industrial equipment where the driven components must stay in step with the motor: conveyors, packaging machinery, printing equipment, and similar drives. The HTD 5M profile is a curvilinear tooth form that engages matching pulleys to transmit torque without slipping.
To confirm fit, check the belt you are replacing. Look for the marking on the back of the belt: it should read 15 / 5M 5000 AFX or show the same profile and length. The width code 15 and the 5M profile must match your pulleys, and the 5000 mm length must match your drive layout. If the old belt is worn or the marking is unreadable, send us the pulley part numbers or a photo of the drive.
When you request a quote, include the part number 15 / 5M 5000 AFX and the quantity you need. If you are unsure about the exact replacement, our team can help confirm the right belt or suggest an equivalent based on the data you provide.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 5000mm
Frequently asked questions
- What does the code 15 / 5M 5000 AFX mean?
- The code identifies this as an Optibelt Alpha Flex timing belt with an HTD 5M profile, a 5 mm pitch, and a 5000 mm length. The 15 indicates the width code. Always match these values to your drive and pulleys.
- How do I confirm this belt fits my drive?
- Check the marking on the back of your old belt. It should show the same profile and length. Also verify that your pulleys are designed for the HTD 5M profile and that the 5000 mm length matches your center distances.
- Can you help if I don't have the part number?
- Yes. Send us photos of the old belt and the drive, or provide the pulley part numbers and center distance. We can help identify the correct belt or suggest an equivalent.