Timing belt Optibelt 15 / 5M 4400 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 15 / 5M 4400 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 15 / 5M 4400 AFX and any equivalents.
The Optibelt 15 / 5M 4400 AFX is an Alpha Flex timing belt built on the HTD 5M profile with a 5 mm pitch and a 4400 mm length. Those two figures do most of the work when you are selecting a replacement: the profile has to match the pulley groove, and the length has to match the drive's center distance and pulley sizes. This page covers what the marking tells you and what to send when you request a quote.
The profile designation, HTD 5M, is the first thing to check against the pulleys on the drive. It describes the tooth form and pitch, so a belt with the same 5 mm pitch and the same profile will seat correctly in the grooves. The length is listed as 4400 mm, which sets where the belt sits once tensioned. If the old belt is still on the machine, read the marking on the back and compare it directly with the code on this page.
Timing belts are commonly replaced as part of a drive inspection rather than on their own. Look at pulley wear, alignment and tension at the same time, since a worn pulley can shorten the life of a new belt. On drives that run more than one belt, replacing the set together keeps the load shared evenly.
We carry the Optibelt 15 / 5M 4400 AFX for maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America. Send the part number by WhatsApp or email and we will confirm it against your application or suggest an equivalent where one fits.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 4400mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The profile, HTD 5M, defines the tooth shape and the 5 mm pitch, so it must match the pulley grooves. The 4400 mm length must match the drive's geometry. Both figures are listed on this page.
- How do I confirm this is the belt on my drive?
- Read the marking on the back of the belt currently fitted and compare it with the code 15 / 5M 4400 AFX. If the marking is worn away, measure or note the pulley profile and the drive layout and send those details with your request.
- What should I send to request a quote?
- Send the part number 15 / 5M 4400 AFX by WhatsApp or email, along with the equipment it runs on and any details from the old belt. We reply promptly and can help confirm the right belt or suggest an equivalent.