Timing belt Optibelt 15 / 5M 2800 AFX

OPTIBELT 15 / 5M 2800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 15 / 5M 2800 AFX and any equivalents.

The Optibelt 15 / 5M 2800 AFX is a timing belt in the Alpha Flex series with an HTD 5M profile, a 2800 mm length and a 5 mm pitch. When you need to match the belt being replaced, confirm those three values against the old belt before you request a quote.

Start with the marking on the back of the belt you are removing. The part number printed there is the fastest way to confirm you are looking at the same belt. Compare it with the code 15 / 5M 2800 AFX, then check the profile and length: HTD 5M and 2800 mm. The 5 mm pitch is stated in the data and should agree with the old belt.

If the back of the belt is worn or the printing is no longer readable, measure the length along the belt and check the tooth profile against the pulleys. A belt with the same profile and length is what you need. Send the part number, the profile and the length in your message so the team can confirm the match or suggest an equivalent.

Replacing a timing belt is also a chance to inspect the drive. Look at the pulleys for worn teeth or damage, check alignment, and confirm the tensioner moves freely. On drives that use more than one belt, replace them as a set so the load stays even. If anything on the drive looks questionable, include that in your request so the right belt can be confirmed.