Timing belt Optibelt 14MHP 3360

OPTIBELT 14MHP 3360 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 14MHP 3360 and any equivalents.

This Optibelt 14MHP 3360 belt is a timing belt in the Omega HP series. It has an HTD 14M profile and a length of 3360 mm. The 14 mm pitch defines the tooth spacing, so it must match the pulleys on your drive.

When selecting a replacement, the profile and length are the critical dimensions. The HTD 14M profile is a synchronous belt profile, and the 3360 mm length is the datum length for this belt. The 14 mm pitch is the distance from one tooth center to the next. If your drive uses HTD 14M pulleys and the current belt is marked with a 3360 mm length, this part number is the correct size.

The Optibelt 14MHP 3360 is part of the Omega HP series. We carry this belt and can quote it by part number. To confirm it fits your application, check the belt marking on the back of your old belt. It should show the profile and length. If you cannot read it, measure the pitch and the number of teeth, or count the teeth and multiply by the 14 mm pitch to verify the length.

For a quote, send the part number 14MHP 3360, the quantity you need, and any details about the drive. If you are replacing multiple belts on the same drive, include that information so we can help you order the correct number. Our team can also help confirm the profile and length from your old belt's marking or from your equipment documentation.