Timing belt Optibelt 14MHP 2100
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 14MHP 2100 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 14MHP 2100 and any equivalents.
Replace a timing belt on an HTD 14M drive by matching the belt marking to the required profile and length. This Optibelt 14MHP 2100 belt is part of the Omega HP series, with an HTD 14M profile, a 2100 mm length and a 14 mm pitch. Use the numbers on the old belt to confirm the replacement before you order.
Start with the belt you are removing. Read the marking on the back: it should show the profile and the length. For this Optibelt belt, the profile is HTD 14M and the length is 2100 mm, with a 14 mm pitch. If the old belt is worn or the print is gone, measure the length and check the pulley groove profile to confirm HTD 14M.
The part number 14MHP 2100 identifies this belt directly. When you request a quote, send that number along with the old belt marking and the drive details. The team can confirm that the profile and length match your application and help you select the correct Optibelt Omega HP timing belt.
If you are replacing more than one belt on the same drive, order them together so the set is matched. Keep the old belt for reference until the new one is installed and the drive is checked.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 2100mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Compare the profile and length on the old belt to HTD 14M and 2100 mm. The part number 14MHP 2100 also identifies this belt directly. If the marking is unreadable, measure the length and check the pulley grooves.
- What information should I send with my quote request?
- Send the part number 14MHP 2100 and, if possible, the marking from the old belt, including the profile and length. Photos of the belt and drive can also help confirm the correct replacement.
- Can I use this belt on a drive that currently runs a different profile?
- No. This belt has an HTD 14M profile and a 14 mm pitch, so it must be used with matching HTD 14M pulleys. Do not substitute a different profile or pitch without checking the drive requirements.