Timing belt Optibelt 14M 4578
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 14M 4578 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 14M 4578 and any equivalents.
This Optibelt Omega timing belt is identified by its HTD 14M profile and 4578 mm length. The 14 mm pitch defines the tooth spacing, so the belt matches drives built for the 14M profile. Use these two figures to confirm the belt your drive requires.
The profile determines how the teeth engage the pulley. HTD 14M is a synchronous profile, so the belt is built for positive engagement rather than friction. The 14 mm pitch is the distance from one tooth center to the next, and it must match the pulley groove spacing exactly. A belt with the same length but a different profile will not run correctly.
The 4578 mm length is the belt's own length figure, quoted as given. When you read the marking on the back of an old belt, compare both the profile and this length against the drive data. If the marking is worn or unreadable, measure the drive or check the machine documentation before ordering.
For a quote, send the part number 14M 4578, or the profile and length if you are working from a marking. If you are unsure whether this is the correct belt for your drive, send a photo of the old belt and the pulley so we can help confirm it or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 4578mm
Frequently asked questions
- What do the profile and length mean on this belt?
- HTD 14M is the profile, which sets the tooth shape and the 14 mm pitch. The 4578 mm figure is the belt length. Both must match your drive.
- How do I confirm this is the right belt for my drive?
- Compare the profile and length against the marking on the old belt or the drive documentation. If you send us the part number and a photo of the old belt, we can help confirm it.
- Can you suggest an equivalent if this exact belt does not fit?
- Yes. Send the part number, the profile and length from your drive, and photos of the belt and pulleys. We will check what we carry and suggest an equivalent.